Tube Laser Cutting in the UAE
Round, square and rectangular tube and pipe cut to length, with holes, slots and notches done in the same pass. Send your drawing for a quote, with delivery across the Emirates.
What tube laser cutting does
A tube laser works like a flat-bed laser, but it cuts profiles instead of sheets. The tube is held in a rotating chuck and fed through the cutting head. As the tube turns and moves forward, the laser cuts holes, slots, notches and end shapes all around it. When the part is finished, the machine cuts it to length and moves on to the next one.
Without a tube laser, the same part would need several steps: cutting to length on a saw, marking out by hand, drilling holes and grinding notches. Each step adds time and a chance of error. On a tube laser, all of it happens in one program, from one drawing, so every part in the batch matches.
Profiles and materials
We cut the profiles that make up most steel frames, railings and structures:
- Round tube and pipe for handrails, frames, furniture and pipework supports
- Square tube for frames, gates, racks and machine bases
- Rectangular tube for structural frames, trailers and fit-out work
Common materials are mild steel, stainless steel and aluminium. Send the profile size, wall thickness, length and material with your drawing, and we will confirm what the machine can take before we quote.
Cuts a tube laser can make
The real value of pipe laser cutting is in the features it adds to each length:
- Clean square or angled end cuts, including mitres for frame corners
- Fish-mouth (saddle) cuts, so one round tube fits neatly against another for welding
- Holes and slots for bolts, pins and cable runs
- Tab and slot joints, where one part locks into another before welding, which makes frames self-jigging
- Notches and cut-outs that let a tube bend or sit over another member
- Etched marks for bend lines, part numbers or assembly order
Tab and slot design is worth asking about. When parts slot together and hold their own position, welders spend less time measuring and clamping, and frames come out square.
Typical parts
Tube work shows up across many trades. Typical jobs include:
- Handrail and balustrade parts with matched fish-mouth joints
- Frames for gates, fences, racks and shelving
- Furniture frames for tables, chairs and display units
- Machine frames, guards and conveyor parts
- Vehicle and trailer frames, roll bars and brackets
- Signage frames and display stands
If your frame also needs flat parts such as base plates or gussets, we cut those on our fiber laser and can deliver the whole kit together.
Why accuracy matters on tube
On a frame, small errors add up. A hole that is a little off on one tube, plus a notch that is a little off on another, can mean a frame that will not bolt together or will not sit square.
Because a tube laser cuts every feature from the same program, the positions of holes and notches are set by the drawing, not by hand marking. Every length in the batch matches. Joints fit with a small, even gap, which gives the welder a better weld with less filling and grinding.
If a dimension is critical to how your frame goes together, mark it on the drawing and we will check it before the batch runs.
How a tube cutting job runs
- Send the drawing. A 3D model (STEP) or a 2D drawing with all hole and notch positions works best. A dimensioned sketch is fine for simple parts.
- We check and quote. We confirm the profile, wall thickness, length and features, then send the price.
- Programming. Your parts are laid out along the stock lengths to cut waste.
- Cutting. The machine cuts each part to length with all features in one pass.
- Checking and bundling. Parts are checked, bundled and labelled so your team can find them on site.
- Delivery. We deliver across the Emirates, or you can collect.
What affects the price of tube cutting
Tube work is priced on the profile, the features cut into it and the quantity.
- Profile size and wall thickness. Bigger and thicker tube takes longer to cut.
- Number of features. Each hole, slot and notch adds cutting time.
- End cuts. Square ends are quickest. Mitres and fish-mouth cuts take a little longer.
- Stock lengths. Parts are laid out along standard lengths. Good layout means less offcut waste.
- Quantity. Larger batches share the setup and cost less per part.
Because one machine replaces sawing, drilling and grinding, cutting on a tube laser often costs less overall than doing those steps by hand, even when the cutting price looks higher.
From cut tube to finished frame
Many customers want more than loose tube. We can weld cut parts into finished frames, gates and supports through our metal fabrication service. Flat parts can be bent on the press brake with sheet metal bending. Send the full drawing set and we will quote the whole job together.
Tube laser cutting FAQs
What is the difference between tube laser cutting and sawing?
A saw only cuts tube to length. A tube laser cuts to length and also adds holes, slots, notches and shaped ends in the same pass. That removes drilling and grinding steps and gives every part in the batch the same dimensions.
Can you cut fish-mouth joints for handrails?
Yes. Fish-mouth or saddle cuts let one round tube sit tightly against another. They are cut from your drawing, so joints fit with a small, even gap ready for welding.
What file should I send for tube cutting?
A 3D model such as a STEP file is ideal. A 2D drawing that shows the profile, length and the position of every hole and notch also works.
Do you cut stainless steel tube?
Yes. We cut mild steel, stainless steel and aluminium tube. Send the profile size, wall thickness and grade with your drawing and we will confirm before quoting.
How much does tube laser cutting cost?
It depends on the profile size, wall thickness, number of holes and notches, end cuts and quantity. Send the drawing with those details for an exact written quote.
Other services
Fiber Laser Cutting
Clean, accurate cuts in steel, stainless, aluminium, brass and copper sheet.
View serviceSheet Metal Cutting
Flat parts cut from sheet and plate, from one prototype to full batches.
View serviceSheet Metal Bending
CNC press brake bending that turns flat blanks into finished shapes.
View serviceCNC Router Cutting
Router cutting for wood, MDF, acrylic and ACP panels and signage.
View serviceMetal Fabrication
Cut, bent and welded steel work built to your drawing.
View serviceAreas we serve
Laser Cutting Umm Al Quwain
Cutting and fabrication for factories in Umm Al Thuoob, the industrial areas and the free trade zone.
See Umm Al Quwain pageLaser Cutting Ajman
Cutting, bending and fabrication for workshops in Ajman Industrial Area and Al Jurf.
See Ajman pageDelivery also covers Sharjah, Dubai, Abu Dhabi, Ras Al Khaimah and Fujairah.
Send your drawing, get a quote
Send a PDF, DXF or DWG file, or a clear sketch with dimensions. Tell us the material, thickness and quantity, and we will come back with a price.