Sheet Metal Bending in the UAE

CNC press brake bending that turns flat laser cut blanks into channels, angles, trays, boxes and brackets. Steel cutting and bending in one job, with delivery across the Emirates.

What CNC bending does

A press brake bends sheet metal by pressing it between a punch and a die. The CNC control sets the depth of the punch and the position of the back gauge for each bend, so the angle and the flange length are repeated on every part.

Bending is what turns a flat blank into a useful shape. A flat rectangle becomes a channel. A flat cross becomes an open box. A strip with holes becomes a bracket. When the blank is laser cut first, the holes and outline are already accurate, so the bent part fits the first time.

Shapes we bend

  • Angles and channels for frames, trims and supports
  • Z and hat sections for cladding supports and stiffeners
  • Trays and boxes for enclosures, cabinets and electrical panels
  • Brackets with one or more bends, from small clips to heavy mounting brackets
  • Covers and guards that wrap around equipment
  • Flashings and trims for building and fit-out work

Steel bending is the most common request, but we also bend stainless steel and aluminium. Each metal springs back a little differently after bending, so the press brake is set for the material and thickness of your job.

Have a drawing ready? Send it on WhatsApp with the material, thickness and quantity for a quote.

Cutting and bending in one job

The best results come when the same supplier cuts and bends the part. Here is why.

The blank size is worked out for you. When metal bends, it stretches on the outside of the bend and compresses on the inside. The flat blank must be sized to allow for this, or the finished part comes out too long or too short. Send a drawing of the finished part, and we calculate the flat blank before cutting.

Holes stay in the right place. Holes near a bend can stretch or move if they are too close to the bend line. We check this on the drawing before cutting.

One supplier, one delivery. Your blanks go from the sheet metal cutting stage straight to the press brake. Nothing waits in transit between two workshops.

Design tips for bent parts

A few simple rules make parts easier to bend and cheaper to produce:

  • Keep holes away from bend lines. A hole too close to a bend can distort. As a rule of thumb, keep it at least a few material thicknesses away.
  • Use a sensible inside radius. A very tight radius can crack some materials, especially aluminium. Ask us if you are not sure.
  • Keep flanges long enough. A very short flange is hard to hold in the press brake. If you need one, tell us and we will check it.
  • Use relief cuts at corners. Small cut-outs where two bends meet stop the metal from tearing.
  • Keep the same thickness throughout. Each part is bent from one sheet thickness.

If your drawing breaks one of these rules, we will flag it and suggest a fix before cutting.

Typical bent parts

  • Electrical boxes, panels and enclosure parts
  • Cable trays and covers
  • Wall brackets, shelf brackets and mounting plates
  • Machine guards and covers
  • Kiosk and counter panels
  • Sign trays and letter returns
  • Trims, flashings and cladding supports
  • Parts for HVAC, kitchen equipment and racks

Many of these go on to be welded or assembled. Our metal fabrication service can take bent parts all the way to a finished product.

How a bending job runs

  1. Send the drawing. A drawing of the finished part with all bend angles and dimensions. A 3D model is ideal.
  2. We check the design. We confirm material, thickness, bend radius and flange lengths, and flag any issues.
  3. Quote. You get a written price for cutting and bending together.
  4. Cutting. Blanks are laser cut with holes and outline in one pass.
  5. Bending. Each part is bent on the CNC press brake in the right order, and the first part is checked against the drawing before the batch runs.
  6. Delivery. Parts are packed to protect the shape and delivered across the Emirates.

What affects the price of bending

Bending is priced on the number of bends, the part size and the batch.

  • Number of bends. Each bend is a separate press stroke and setup.
  • Part size. Large parts need more handling and sometimes two people.
  • Material and thickness. Thicker and harder metals need more force and careful setup.
  • Tooling. Unusual radii or very short flanges can need special tools.
  • Quantity. The first part takes the longest to set up. Every part after that is quicker.

Ordering cutting and bending together usually costs less than buying blanks in one place and bending them in another.

Bending aluminium and stainless steel

Stainless steel springs back more than mild steel, so it needs a little extra bend to reach the final angle. Aluminium is softer, but some grades crack if the bend radius is too tight. Both often have a brushed or polished face that must not be marked, so tell us which side is the show face. For flat stainless and aluminium parts without bends, see our fiber laser cutting page.

Sheet metal bending FAQs

Can you cut and bend the same part?

Yes. We laser cut the flat blank and bend it on the CNC press brake in one job. Send a drawing of the finished part and we work out the flat size for you.

Which metals can you bend?

Mild steel, stainless steel and aluminium. Send the grade and thickness with your drawing and we will confirm the bend is possible before quoting.

Why did my bent part come out the wrong size before?

Usually the flat blank did not allow for the metal stretching in the bend. When we cut and bend the part ourselves, we calculate the blank from the finished dimensions so the final part matches the drawing.

Do you bend small quantities?

Yes. We bend single prototypes and production batches. The first part of every batch is checked against the drawing before the rest are bent.

How much does sheet metal bending cost?

The price depends on the number of bends, part size, material, thickness and quantity. Send a drawing of the finished part and you will get one written quote for cutting and bending together.

Get a quote

Send your drawing, get a quote

Send a PDF, DXF or DWG file, or a clear sketch with dimensions. Tell us the material, thickness and quantity, and we will come back with a price.

Request a quote

Prefer to talk? Call or WhatsApp +971 55 242 6027.