Sheet Metal Cutting in the UAE

Steel, stainless and aluminium sheet cut to size or cut to any shape from your drawing. From one prototype to full production batches, delivered across the Emirates.

Cut to size or cut to shape

Most sheet jobs fall into one of two types.

Cut to size. You need rectangles or simple blanks at exact dimensions, for example panels for a cabinet, plates for a floor, or blanks that will be bent later. The aim is square edges, correct sizes and as little waste as possible.

Cut to shape. You need parts with curves, holes, slots or detailed outlines, for example brackets, covers, decorative panels or machine parts. The aim is to match the drawing exactly, including every hole.

We handle both on the CNC laser. Because the cutting path comes from a drawing, a simple rectangle and a detailed bracket are made the same way, and both come out accurate.

Why laser beats shearing and hand cutting

Steel sheet cutting can be done with shears, grinders, plasma or a laser. Each has its place, but for accurate parts the laser has clear advantages.

  • Any shape. A shear only cuts straight lines. A laser cuts curves, holes and inside corners in the same pass.
  • No distortion from pressure. A shear presses the sheet, which can bend thin material. A laser does not touch the sheet.
  • Clean edges. Compared with a grinder or plasma, a laser leaves a narrow cut and a cleaner edge, with less heat spread into the part.
  • Exact repeats. The same program cuts every part, so a batch of fifty blanks are all the same size.
  • Less waste. Parts are nested close together, which matters when the sheet is stainless or aluminium.

For straight cuts on very thick plate, other methods can still make sense. Send the drawing and we will tell you the best route.

Have a drawing ready? Send it on WhatsApp with the material, thickness and quantity for a quote.

Materials and sheet types

We cut the sheet metals used most in UAE workshops:

  • Mild steel sheet and plate, hot rolled or cold rolled
  • Stainless steel sheet, including brushed and polished finishes
  • Aluminium sheet and plate
  • Brass and copper sheet for decorative and electrical parts

If your sheet has a protective film or a brushed face, tell us which side is the show face so we cut with it facing the right way. For a detailed look at how each metal cuts, see our fiber laser cutting page.

Common sheet metal parts

  • Cut-to-size panels and blanks for cabinets, kiosks and enclosures
  • Base plates and floor plates
  • Covers, guards and access panels
  • Brackets and mounting plates
  • Flat blanks that will be bent into channels, angles and boxes
  • Signage trays and backing sheets
  • Perforated or patterned panels for screens and ventilation

Many of these parts are bent after cutting. If yours will be, the blank size must allow for the bend. We can work that out from a drawing of the finished part, then cut and bend in one job with our sheet metal bending service.

Getting the best price on sheet jobs

The price of a sheet job mostly comes from three things: the material, the cutting time and the amount of sheet used.

Nesting. Arranging parts tightly on the sheet reduces scrap. If you have several different parts, send them together so they can share sheets.

Quantity. Setup time is shared across the batch, so the price per part usually falls as the quantity rises.

Design details. Very small holes, sharp inside corners and long complex outlines add cutting time. If a feature is not needed, removing it can lower the price.

Material supply. We can supply the sheet, or quote for cutting material you provide. Tell us which you prefer when you ask for the quote.

How a sheet metal cutting job runs

  1. Send your drawing or list. A DXF or DWG file for shaped parts, or a simple list of sizes and quantities for rectangles.
  2. Quote. We confirm the material, thickness and quantity and send a written price.
  3. Nesting and cutting. Parts are nested on the sheet and cut on the CNC laser.
  4. Checking. Sizes are checked against your drawing or list.
  5. Delivery. Parts are packed flat and delivered across the Emirates, or ready to collect.

Need more than flat parts?

Sheet metal cutting is often the first step in a bigger job. Cut parts can be bent, welded and assembled into finished products through our metal fabrication service. For tube and pipe, see tube laser cutting.

Sheet metal cutting FAQs

Can you cut sheet metal to exact sizes?

Yes. Send a list of sizes and quantities, or a drawing. The CNC laser cuts each blank from the program, so every piece in the batch comes out the same size.

Is laser cutting better than shearing?

For straight cuts on simple blanks, shearing can work. For any shape with curves, holes or slots, or where accuracy and clean edges matter, laser cutting is the better choice because it cuts the whole outline in one pass without pressing the sheet.

Can I supply my own sheet?

Yes. Tell us when you ask for the quote. We can quote for cutting only, or for cutting with the sheet supplied.

Do you cut stainless sheet without scratching the face?

Tell us which side is the show face and whether the sheet has a protective film. We cut with the show face positioned correctly and handle the parts with care after cutting.

Can you cut and then bend the sheet?

Yes. We can cut the blank and bend it on the press brake in one job. Send a drawing of the finished part and we will work out the flat blank size.

How much does sheet metal cutting cost?

It depends on the material, thickness, the number and size of parts, and how well they nest on the sheet. Send a drawing or a list of sizes with quantities for an exact written quote.

Get a quote

Send your drawing, get a quote

Send a PDF, DXF or DWG file, or a clear sketch with dimensions. Tell us the material, thickness and quantity, and we will come back with a price.

Request a quote

Prefer to talk? Call or WhatsApp +971 55 242 6027.